Baldor MicroFlex, Installation Manual

Page: 112 / 124

www.baldormotion.com
C-2 CE & UL MN1919
C.1.3 Declaration of conformity
EC Declaration of Conformity
Date: 01/02/05 Ref: DE00014-001
Manufacturer: Baldor UK Limited
Address: Mint Motion Centre, Hawkley Drive, Bristol Distribution Centre, Bristol, BS32 0BF, United Kingdom
Hereby declare that the product:
MicroFlex Single-Axis Servo and Positioning Drive, being one of:
FMH2A01TR-
x
N
y
3 FMH2A03TR-
x
N
y
3 FMH2A06TR-
x
N
y
3 FMH2A09TR-
x
N
y
3
(where
x
= R or E,
y
= 4 or 2)
when used in accordance with the guidance given in the corresponding MicroFlex Installation Manual, MN1919, conforms
with the protection requirements of the following Council Directives, by application of the relevant harmonized standards:
The Electromagnetic Compatibility Directive 89/336/EEC and its amending directives:
Standard:
EN61800-3:1996 + A11:2000
Title:
Adjustable speed electrical power drive
systems Part 3: EMC Product standard,
including test methods
.
Comments:
Emissions & Immunity comply
with both 1st & 2nd environments.
The Low Voltage Directive 72/23/EEC and its amending directives:
Standard:
EN61800-5-1:2003
Title:
Adjustable speed electrical power drive systems. Safety requirements. Electrical,
thermal and energy
.
EN61800-2:1998
Adjustable speed electrical power drive systems. General requirements. Rating
specifications for low voltage adjustable frequency a.c. power drive systems
.
EN50178:1998
Electronic equipment for use in power installations
.
EN60529:1992
Specification for degrees of protection provided by enclosures (IP code)
.
EC Declaration of Incorporation
The Machinery Directive 98/37/EC and its amending directives:
The above product is intended to be incorporated into machinery or to be assembled with other machinery to constitute
machinery covered by directive 98/37/EC. As such does therefore not in every respect comply with the provisions of
directive 98/37/EC.
User must follow the guidance given in this directive to meet all necessary protection requirements. All instructions,
warnings & safety information of the product manual MN1919 must be adhered to. User must follow the guidance given in
harmonized standard EN60204-1 (Safety of Machinery) to meet necessary protection requirements of this directive.
and furthermore declare that it may not be put into service before the machinery in which it will be incorporated is declared
to comply with the provisions of directive 98/37/EC, as amended.
Signed:
Dr. Gerry Boast
Engineering Manager