Section 1
General Information
General Information 1-3
MN1269
Caution:
To prevent equipment damage, be certain that the electrical service
is not capable of delivering more than the maximum line short
circuit current amperes listed for the control rating.
Caution:
To prevent equipment damage, be certain that the input power has
correctly sized protective devices installed as well as a power
disconnect.
Caution:
Avoid locating control immediately above or beside heat generating
equipment, or directly below water or steam pipes.
Caution:
Avoid locating control in the vicinity of corrosive substances or
vapors, metal particles and dust.
Caution:
The X and Y Axis motors may tend to run away, out of control, if the
tach wires are reversed. If the axis moves in the wrong direction,
the motor wires are reversed. If, however, reversing the leads
doesn’t stop a runaway motor, make sure the T (Tachometer)
potentiometer is not full counterclockwise.
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ, 07045-0097
(973) 335-1007 • Toll Free: (800) 922-1103 • Fax: (973) 335-1661
www.servosystems.com
