2-2 Installation
MN1269
Figure 2-1 Installing the Module
Mount the Chassis
1.
Remove the shipping base by taking off the four nuts and bolts at the corners of
the chassis.
2.
Select an appropriate mounting location that meets the vapor, vibration and
particle avoidance requirements stated in General Precautions in section 1.
3.
Lay out the hole pattern according to the dimensions of your chassis. Refer to
Appendix A for dimensions.
4.
Cut any wiring openings needed in the cabinet, debur the edges, and bolt the
chassis securely within the equipment enclosure. Use one of the mounting
bolts to attach a ground strap to earth ground.
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ, 07045-0097
(973) 335-1007 • Toll Free: (800) 922-1103 • Fax: (973) 335-1661
www.servosystems.com
