Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compatible with SpaTouch 1 & 2
26
03.17
Program memory failure* – M022**
At Power-Up, the system has failed the Program Checksum
Test. This indicates a problem with the firmware (opera-
tion program) and requires a service call.
The settings have been reset
(Persistent Memory Error)* –
M021**
Contact your dealer or service organization if this message
appears on more than one power-up.
The clock has failed* – M020**
Contact your dealer or service organization.
Configuration error
(Spa will not Start Up)
Contact your dealer or service organization.
The GFCI test failed
(System Could Not Test
the GFCI) – M036**
(North America Only) May indicate an unsafe installation.
Contact your dealer or service organization.
A pump may be stuck on –
M034**
Water may be overheated. POWER DOWN THE SPA. DO
NOT ENTER THE WATER. Contact your dealer or service
organization.
Hot fault – M035**
A Pump Appears to have been Stuck ON when spa was
last powered POWER DOWN THE SPA. DO NOT ENTER
THE WATER. Contact your dealer or service organization.
* Some messages can be reset from the panel. Messages
that can be reset will appear with a Clear Icon at the bot-
tom of the Message Screen. Press the Clear Icon text to
reset the message.
**M0XX is a Message Code.
Codes like this will be seen in the Fault Log
