Baker SterilGARD SG404, Service Manual, Page: 13 / 94

389D001 Rev G 13 of 94
2. Channel Stand Leg Assembly Procedure:
Step 1:
If cabinet is factory shipped on channel
stand remove components
4 -11 that are separately shipped with
cabinet.
Step 2:
Lift cabinet off the skid and high enough to
allow clearance for the adjustable legs to
be assembled to the front and rear of the
channel stand sides.
For a 26
1
/
8
” to 28
1
/
8
” [664 mm-714 mm]
work surface height align the upper two
holes in the leg with the upper two holes in
the stand.
For a 30
5
/
8
” to 32
5
/
8
” [778mm-829 mm]
work surface height align the upper two
holes in the leg with the middle two holes
in the stand.
For a 36
5
/
8
” to 38
5
/
8
” [931 mm-981 mm]
work surface height align the upper two
holes in the leg with the lower two holes in
the stand.
Attach channel cover, align slots with
holes and use
3
/
8
” hardware on both sides
to secure legs.
Skip to Step 7
Step 3:
If lifting of the complete cabinet is not possible, carefully slide the cabinet off the skid onto a moving blanket
or similar protective material in order to protect floor finish.
Slide the cabinet into its final destination prior to assembly of the adjustable legs.
Channel, cover
Adjustable leg
with leveler
3 /
8
” Hardware
Both sides
[Items 5, 7, & 8]