Baker Hughes Panametrics oxy.IQ, User Manual

Page: 23 / 56

oxy.IQ User’s Manual 15
Chapter 4. User Programming
4.4 The Output Menu
Proceed to the appropriate section to program the desired menu option.
4.4.1 Range
See “Selecting the Output Range” on page 10 .
4.4.2 Trim
See “Trimming the Analog Output” on page 10 .
4.4.3 Error Type
To select the process conditions that will activate an on-screen warning and send an alarm to the analog output
device, complete the following steps:
1. Press the Enter key to enter the Main Menu .
2. Press the key twice and then press the Enter key to enter the Output menu.
3. Press the key twice and then press the Enter key to enter the Error Type menu.
4. Use the and keys to select the desired option and then press the Enter key to activate that error type.
A check mark will appear next to the selected option to indicate that it is activated. The following options are
available, and you may activate as many of these options as you wish.
Note: Only the first four options are displayed on the screen upon entering this menu. When you scroll down to the
fourth option (low temp), a down arrow to the right of this option indicates that an additional screen of
options is available.
• High O
2
(Fixed value of >25%, regardless of selected range)
• Low O
2
(programmable)
• High temp
• Low temp (programmable)
• Temp comp (listed on second screen of options)
Note: Pressing the Enter key on an error type that has already been activated, will deactivate that option and
remove the check mark.
5. Press the Cancel key three times to return to measurement mode.