Baker Hughes Panametrics oxy.IQ, User Manual

Page: 13 / 56

oxy.IQ User’s Manual 5
Chapter 2. Installation
Chapter 2. Installation
2.1 Mounting the oxy.IQ
To install the oxy.IQ into the process or sample system, refer to Figure 9 on page 24 or Figure 2 below and proceed to
the next page.
Figure 2: Outline and Installation Drawing
Note: To avoid collecting condensate that may damage the oxygen sensor, mount the oxy.IQ in an upright
position, with the sensor manifold below the electronics module.
Install the oxy.IQ by completing the following steps:
1. Remove the oxy.IQ and the separately-packaged oxygen sensor (see Figure 3 below) from the shipping
container. Keep the shipping container and packaging material for possible future use.
IMPORTANT: DO NOT open the oxygen sensor package until you are ready to install the sensor.
Connector
1.58
[40.3]
2.05
[52.1]
B
C
2.75
[69.8]
4.10
[104.2]
1.33
[33.9]
A
0.32
[8.25]
1.03
[26.27]
0.53
[13.57]
1.00
[25.40]
2X
1/8-27NPT-2B
.27 [6.9]
2X
8-32 UNC-2B
.51 [12.9] MAX
Ø1.75
[44.3]
Note: All dimensions are inches [mm].