Baker Hughes PanaFlow Z1G, User Manual

Page: 33 / 59

Table 8: Available measurement parameters
Option Bar Description Good Bad
VEL Displays the flow velocity. N.A. N.A.
VOLUM Displays the volumetric flow. N.A. N.A.
+TOTL Displays the forward totalized volume flow. N.A. N.A.
-TOTL Displays the reverse totalized volume flow. N.A. N.A.
TIMER Displays the total flow measurement time. N.A. N.A.t
MDOT Displays the mass flow. N.A. N.A.
+MASS Displays the forward totalized mass flow. N.A. N.A.
-MASS Displays the reverse totalized mass flow. N.A. N.A.
SS up Displays the signal strength for the upstream direction. 50 - 75 <50 or >75
SS do Displays the signal strength for the downstream direction. 50 - 75 <50 or >75
SNDSP Displays the measured speedd of sound in the gas. N.A. N.A.
Tup Displays the upstream ultrasonic signal transit time. N.A. N.A.
Tdown Displays the downstream ultrasonic signal transit time. N.A. N.A.
DELTA
Displays the transit time difference between the upstream and
downstream signals.
N.A. N.A.
Tot K Displays the total K factor. N.A. N.A.
PEAK% Displays the percentage of peak (set to +50 by default). N.A. N.A.
Qup Displays the signal quality for the upstream direction. ≥ 1200 -400 to +400
Qdown Displays the signal quality for the downstream direction. ≥ 1200 -400 to +400
AMPup Displays the value for the signal amplitude of the upstream direction. 24 ± 5 <19 or >29
AMPdn Displays the value for the signal amplitude of the downstream direction. 24 ± 5 <19 or >29
CNTup Displays the AGC DAC count for the upstream gain setting. N.A. N.A.
CNTdn Displays the AGC DAC count for downstream gain setting. N.A. N.A.
P#up Displays signal peaks for the upstream direction. 100 - 2300 <100 or >2300
P#dn Displays signal peaks for the downstream direction. 100 - 2300 <100 or >2300
TEMP Displays the gas temperature (from 0/4-20mA input). N.A. N.A.
PRESR Displays the gas pressure (from 0/4-20mA input). N.A. N.A.
AcVOL Displays the actual volumetric flow. N.A. N.A.
StVOL Displays standard volumetric flow. N.A. N.A.
Tu S
1
Displays Skan transit time upstream. N.A. N.A.
Td S
1
Displays Skan transit time downstream. N.A. N.A.
DT S
1
Displays Skan Delta T. N.A. N.A.
Tu M
1
Displays Measure transit time upstream. N.A. N.A.
Td M
1
Displays Measure transit time downstream. N.A. N.A.
DT M
1
Displays Measure Delta T. N.A. N.A.
Vinst Displays the instantaneous velocity. N.A. N.A.
1
availabloe only if Burst Mode = S/M
25