Baker Hughes PanaFlow Z1G, User Manual

Page: 27 / 59

Table 6: Available volumetric / Totalizer units
English Metric
ACF = Actual Cubic Feet ACM = Actual Cubic Meters
KACF = Thousands of ACF KACM = Thousands of ACM
MMACF = Millions of ACF MMACM = Millions of ACM
SCF = Standard Cubic Feet SCM = Standard Cubic Meters
KSCF = Thousands fo SCF KSCM = Thousands of SCM
MMSCF = Millions of SCF MMSCSM = Millions of SCM
3.7.3 Selecting totalizer units
1. Scroll to the desired Totalizer Units for the totalized flow
rate display and press [

]. The available units are listed
in Table 6 above.
2. Scroll to the desired number of Tot Decimal Digits ( digits
to the right of the decimal point in the totalized flow rate
display) and press [

].
3. Do one of the following:
• If
MASS FLOW is ON , proceed to “Selecting Mass Flow
Units” on page 29 .
• If MASS FLOW is OFF , the meter returns to the Channel
PROGRAM menu.
3.7.4 Selecting mass flow units
1. Scroll to the desired Mass Flow units for the flow rate
display and press [

]. The available units for this prompt
are determined by the selection made at the System
Units prompt (see Table 7 below).
Table 7: Available mass flow units
LB = Pounds Kilograms
KLB = Thousands of LB Metric Tons (1000 KG)
MMLB = Millions of LB
Tons (2000 LB)
2. Scroll to the desired Mass Flow Time units for the mass
flow rate display and press [

].
3. Scroll to the desired number of Mdot Decimal Digits
( digits to the right of the decimal point in the mass flow
rate display) and press [

].
4. Scroll to the desired Mass (Totalizer) units for the
totalized mass flow rate display and press [

]. The
available units for this prompt are determined by the
selection made at the System Units prompt.
5. Scroll to the desired number of Mass Dec. Digits ( digits
to the right of the decimal point in the totalized mass
flow rate display) and press [

].
After completing the above steps, the PanaFlow Z1G/Z2G
Process Gas Flowmeter returns to the Channel PROGRAM
menu.
19