Baker Hughes Masoneilan 12400 Series, Instruction Manual & Safety Manual

Page: 71 / 81

® 2017 Baker Hughes, a GE company. All rights reserved. Masoneilan 12400 Series Transmitter/Controller Instruction Manual | 69
APPENDIX C
SCREEN DESCRIPTION FOR ADVANCED SETUP MENU – 2/2
SMART F I LT ERING
Validate by pressing the * to enter the Smart Filtering menu.
S MART F I LT ERING ON
Activate the Smart Filtering function.
S MART F I LT ERING OFF
Deactivate the Smart Filtering function.
TUNE
Validate by pressing the * to manually or automatically tune the smart filtering
parameters.
D EAD Z ONE of
INT E G RATION : %
Manual adjustment of this parameter between 0.01% and 10%.
W INDOW of VAL IDATION : s Manual adjustment of this parameter between 0.1 s and 32 s.
AUTO MATIC TUNE Validate by pressing the * to automatically tune the smart filtering parameters.
↑
BACK Return to previous menu.
S PECIFIC G RAVITY M ETER
CALIB RATION
Validate by pressing the * to calibrate the Specific Gravity Meter. Enter the sub-menu and
proceed as a normal level calibration.
S PECIFIC G RAVITY for
CALIB RATION
Validate by pressing the * to set the specific gravity of the liquid used during the
calibration procedure. Settable value ranges from 0.001 to 10.
ZERO When displayed, empty the tank (or simulate) so that displacer is fully out of liquid. Wait
till the displacer is stable then press * to define the zero, which is the Reference Low (REF
L).
SPAN
When displayed, fill the tank (or simulate) so that displacer is fully immersed in liquid. Wait
till the displacer is stable then press * to define the span, which is the Reference High (REF
H).
CANCEL Validate by pressing the * to cancel the parameters saving procedure.
SAVE Validate by pressing the * to start the saving procedure of parameters previously entered
in the instrument memory.