Baker Hughes Masoneilan 12400 Series, Instruction Manual & Safety Manual

Page: 67 / 81

® 2017 Baker Hughes, a GE company. All rights reserved. Masoneilan 12400 Series Transmitter/Controller Instruction Manual | 65
APPENDIX B
SCREEN DESCRIPTION FOR BASIC SETUP MENU – 2/2
ZERO When displayed, empty the tank (or simulate) so that displacer is fully out of liquid. Wait
until the displacer is stable then press * to define the low reference (REF L).
SPAN
When displayed, fill the tank (or simulate) so that displacer is fully immersed in liquid. Wait
until the displacer is stable then press * to define the high reference (REF H).
SAVE Validate by pressing the * to start the saving procedure of parameters previously entered
in the instrument memory.
CANCEL Validate by pressing the * to cancel the parameters saving procedure.
CHANGE S PECIFIC
G RAVITY
Enter that function to set the Specific Gravity of Service in case it is different from the
Specific Gravity of Calibration.
S PECIFIC G RAVITY of
SERV ICE
Validate by pressing the * to set the Specific Gravity of the liquid of service if it is different
from the Specific Gravity of Calibration. Settable value ranges from 0.001 to 10.
L OW S PECIFIC G RAVITY of
SERV ICE
Used in case of an interface instrument. Validate by pressing the * to set the Specific Gravity
of the lighter liquid used in service if it is different from LSG CAL. Settable values range from
0.001 to the value of HSG SER.
H IGH S PECIFIC G RAVITY of
SERV ICE
Used in case of an interface instrument. Validate by pressing the * to set the Specific Gravity
of the heavier liquid in service if it is different from HSG CAL. Settable values range from LSG
SER to 10.0.
SAVE Validate by pressing the * to start the saving procedure of configuration parameters
previously entered in the instrument memory.
CANCEL Validate by pressing the * to cancel the parameters saving procedure.
↑ BACK Return to previous menu.