Baileigh DP-3814B, Operator'S Manual

Page: 16 / 40

14
14
Anchoring the Machine
•
Sizes of material to be processed through the machine.
•
Space needed for auxiliary stands, worktables, or other machinery.
•
Clearance from walls and other obstacles on each side of the machine to allow for head and
or table swing.
•
Maintain an adequate working area around the machine for safety.
•
Have the work area well illuminated with proper lighting.
•
Remove scrap and waste materials regularly, and make sure the work area is free from
obstructing objects.
•
Keep the floor free of oil and make sure it is not slippery.
•
Once positioned, mount the machine on a workbench being aware of the following:
•
Overall weight of the machine and the weight of material being processed.
•
Make sure the workbench is properly reinforced to support the total weight.
•
The strongest mounting option is where the holes are drilled all the way through the
workbench and the machine is secured with bolts, washers, and nuts.
Two Person Lift. Use an assistant or lifting devise to support the weight of the
machine.
Securing the Base
•
The base of the drill press has two mounting holes. The drill press should be level and rest
solidly on the bench. Place shims under the four corners of the base as required for leveling
the drill press.
•
Locate the drill press on your work surface.
•
Using the base as a template, mark the holes on the mounting surface.
•
Drill thru and bolt down the base. Customer to provide necessary hardware.
WARNING:
Before operating the Baileigh Drill Press make sure it is
securely bolted to a bench which is in turn secured to the floor to prevent tip over. If
the drill press tips over on you, it could cause severe injury or death.