Baileigh BSV-24VS, Operator'S Manual

Page: 39 / 48

36
36
Blade Tracking
Note: Blade tracking has been set at the factory and should not require adjusting.
Before making any tracking adjustments, try a new blade. Warped blades will not track properly.
If a tracking issue occurs, adjust the top sheave.
When the blade band is tracking towards the flange:
1. Loosen the (4) bearing plate mounting bolts.
2. Back out the top (2) jack screws a bit.
3. Re-tighten the (4) mounting bolts and check the tracking again.
4. Reverse the procedure to track the blade band away from the flange.
figure 31
Side View of
Top Sheave
Plan View of
Top Sheave
mounting bolts
jack screws