Baileigh BSV-24VS, Operator'S Manual

Page: 19 / 48

16
16
Lower Blade Pulley with Adjustable Brush
The brush is used to help control the amount of metal fillings and dirt
between the blade and pulleys. Keep it clean and adjust as it wears. The
bristles should have a slight pressure against the pulley at all times.
Tilting Work Table
Located under the work table are the angle adjusting
bolts. As the table is tilted the angles can be read on
the graduated scales.
Upper and Lower Blade Guides
The blade guides provide side-to-side and back
support for keeping the blade straight while
cutting material. The blade guides are tungsten
steel where they come in contact with the blade
to reduce wear on the guides. The guides must
be kept properly adjusted for accurate cuts.
Lower
Upper