24
24
Depth Stop
Your drill press comes with a depth stop adjustment for
use when drilling.
1. Loosen the depth collar lock knob (A).
2. Secure the wood stock you will be drilling onto the drill
press table.
3. With the desired bit installed, lower the spindle until
the tip of the bit just touches the wood stock you will
be drilling. Hold the spindle in this position.
4. Turn the depth collar to the desired depth indicated by
the scale on the collar (B).
5. Secure the collar by tightening the lock knob (A).
6. Remove the wood stock and test the depth stop by
measuring how far the spindle travels when the
handles are rotated (C).
A
B
C
Summary of Contents for DP-2012F-HD-V3
