Baileigh Industrial DP-2012F-HD-V3, Operator'S Manual

Page: 30 / 40

28
28
Monthly Maintenance
•
Check that all screws and bolts are tight and secure.
•
Wipe built up grime from with a rag and a mild solvent.
•
Check for worn or damaged electrical cables.
•
Inspect regularly for tension and wear. Check pulleys to ensure that they are properly
aligned. See pulley/V-belt sections for proper tension and pulley alignment procedures.
Note: Proper maintenance can increase the life expectancy of your machine.
Greasing the Machine
1. Grease the gear rack on the column to keep the table moving smoothly.
2. Lubricate the spline of the spindle and the teeth of the rack with a #2 grease.
3. Fully extend the spindle and lightly grease the spindle shaft.
4. A coat of automotive type paste wax applied to the table and column will help to keep the
surfaces clean.
Storing Machine for Extended Period of Time
If the Drill Press is to be inactive for a long period of time, prepare the machine as follows:
•
Detach the plug from the electrical supply panel.
•
Clean and grease the machine.
•
Cover the machine.