BAIC SENOVA X55, Manual

Page: 86 / 287

Open and close 80
2
O
pe
ra
ting
sy
ste
m
a
nd e
qui
pm
ent
Here are some examples of how to unlock the
door stop button by pressing the lock when the
door is not closed:
●
With all doors closed, but the engine
compartment cover or trunk lid is not closed,
press the lock button
All the turn signals
flash 3 times, the horn sounds 3 times, and all the
doors remain locked. However, after about 10
seconds, the horn will sound again, and all the
turn signals will flash once with each horn, until
the unlock button
is pressed. Or stop after
30 seconds of alarm timeout, reminding the user
that the engine compartment cover or trunk lid is
not closed.
●
In the case where any of the doors is not closed,
the lock key lock is pressed and the lock
is not performed. When the multimedia display
“arming tone” is turned on, the arming fails, the
horn sounds 3 times, and the turn signal flashes 3
times to remind you
Operating system and equipment
With all the doors locked, press the unlock button
once,
all the turn signals flash 2 times, the
position lights for 25 seconds, the doors are
unlocked, and the folded exterior mirrors are
automatically deployed (if equipped).
After using the smart key unlock function, if
none of the four doors and two covers are opened
within 30 seconds, all doors will be automatically
re-locked.
Warning
●
Smart Key Unlock can be set to unlock
the left front door a single time or unlock
all doors individually. This feature can be
set via the multimedia display. (For
detailed operation, please refer to the
separate instruction manual)