Instrument and control mechanism
70
2
O
pe
ra
ting
sy
ste
m
a
nd e
qui
pm
ent
12. Engine coolant temperature warning light
(red)
When the keyless start/stop button is in "RUN"
mode, this light is on for self-detection, after self-
detection it will turn off. If the warning light goes
on in the process of traveling, it indicates the
engine coolant temperature is too high. Trip
computer screen displays the message "high
engine water temperature".
Warning
●
I f the engine cooling water temperature
is too high, please reduce the engine speed,
immediately stop the vehicle under the
precondition that the safety is ensured,
wait until the temperature lowers to
normal level, and then inspect the level of
coolant.
●
If the engine coolant temperature meter
displays sustained highest temperature or
near. Please park and inspect the vehicle,
or get the vehicle inspected and repaired
by the authorized dealer of BAIC Motor.
13. Cruise control ON indicator light*
(green)
The light sparkles with 2HZ indicates that the
cruise control system is in processing. After the
light turn on constantly, the function is ready and
work normally.
14. Right turn signal lamp
(green)
It indicates that the right turn signal lamp is
turned on. When the right turn signal lamp or
hazard warning light is turned on, this indicator
will flash.
If the indicator flashes quicker than normal state,
it means that the circuit of right turn signal lamp
is in fault or the bulb is broken. At this time the
trip computer screen displays the message "right
turn signal lamp fault". Check the turn signal
lamp for fault, and contact the authorized dealer
of BAIC Motor for repairs as soon as possible.
15. Lane departure indicator/fault warning light*
(green/red)
When lane departure pre-warning system is on,
the light is on as green. If the system is
dysfunctional, the light is red. Meanwhile the
combination instrument warning window will
display ‘Land departure pre-warning system
error’ with the warning light and prompt tone.
16. Brake system fault/low brake fluid level
warning light
(red)
When the keyless start/stop button is in "RUN"
mode, this light is on for self-detection, after self-
detection it will turn off. If the warning light does
not go out or goes on during driving, it indicates
that the brake system may have a fault or lack
brake fluid.
The trip computer screen displays "brake system
fault" when it goes on, and it indicates there is a
brake system fault. If the message "Add brake
fluid" is displayed, it indicates low brake fluid
level.
Warning
The warning light goes on in the process of
traveling:
●
Do not depress the brake pedal
repeatedly.
●
You should stop immediately in the
premise of ensuring safety, and
immediately contact the authorized dealer
of BAIC Motor.
Summary of Contents for SENOVA X55
Page 6: ......
