29.04.2013 TB-b bta_bj_vogue_wave_engl_29042013.indd
30
Caution! The jet housing
is made from ABS. If the
suction and pressure con-
nections are glued in-situ,
allow for a curing time of at
least 12 hours!
27.0 .2010 TB-b beckenausschnitt_polyesterbecken_engl.ai
~250
~310
1)
10x36°(360°)
45°
2)
4x90°(=360°)
TK Ø255
Ø233
Ø7
1) Fastening holes for clamping ring and jet-housing (10x)
2) Fastening holes for nozzle housing (4x)
Nozzle
Pool wall preparation for polyester pools
Place the gasket with nobs (26) onto the jet housing (1), push in and position at the back
of the pool wall.
Working from the front, use the 10 self-tapping screws (52) to attach it to the pool wall via the clamping
ring (28) and the gasket for clamping ring (27).
Caution! Tighten the self-tapping screws by hand. Do not use force!
Fitting of the jet housing in poyester pools
27.04.2010 TB-b montageanle tung_polyesterbecken_engl.ai
52
1
28
27
Polyester pool
Pressure tube
26
Fig. 3
Fig. 4
