BADU JET Perla, Translation Of Original Operation Manual, Page: 83 / 268

Maintenance
06|2020 EN 37
8 Maintenance
NOTICE
 Before maintenance work, close all shut-off valves and drain
all pipes.
When? What?
Regularly  Check the pump is not leaking
 Check the stability of the unit, all
impurities should be removed
 Check the electrical contacts in general
 Separate potential connector
If there is a
chance of frost  Remove the unit from the pool. Empty
and store it in a dry location.
 After completing all maintenance work, perform all necessary
measures for start-up. See point 6.1 on page 28.
8.1 Care Instructions
If needed, wash the unit with water and wipe with a damp cloth.
Do not use abrasive cleaning agents!
A few sprays of a cleaning agent especially for use on acrylic
surfaces can be used occasionally. Wipe with a clean, dry cloth.
Heavily soiled surfaces can be cleaned with warm soapy water or
a mild cleanser.
Limescale deposits/water spots can be removed with a mixture of
spirit vinegar and water. Removal of light scratches or rough spots
on shiny surfaces can be carried out using a care kit found in
sanitary supply stores.