BADU JET Perla, Translation Of Original Operation Manual

Page: 57 / 268

Safety
06|2020 EN 11
2.7.2 Rotating parts
There is a risk of shearing and crushing due to exposed rotating
parts.
 Only perform servicing when the pump/unit is not in
operation.
 Prior to servicing, ensure the pump/unit cannot be switched
back on.
 Immediately after finishing servicing, reattach or reactivate all
protective equipment.
2.7.3 Electrical energy
There is an increased risk of electric shock when working on the
electrical system due to the humid environment.
Electrical protective earth conductors which were not installed
correctly can also result in electric shocks, for example due to
oxidation or cable breakage.
 Observe VDE and utility company regulations.
 Build swimming pools and their protection according to
DIN VDE 0100-702.
 Before working on the electrical system, take the following
measures:
– Disconnect system from the power supply.
– Attach a warning sign: “Do not switch on! The system is
being worked on.”
– Ensure that the system is free of voltage.
 Check the electrical system regularly to ensure it is in proper
working condition.
2.7.4 Hot surfaces
The electric motor can reach temperatures of up to 70 °C. There
is a risk of being burned.
 Do not touch the motor during operation.
 Allow the pump/unit to cool down before servicing it.
2.7.5 Suction danger
The following dangers can result:
–
Sucking towards, sucking in or jamming of the body or body
parts, clothing, jewellery
– Knotting of the hair
 Maintain installation distance to the pool wall of ≤ 45 mm
 Never operate the system without a cover and light cover.

Do not wear loose swimwear.
 Use a bathing cap if you have longer hair.
 Check and clean the suction openings regularly.