background image

 

 
 

WARRANTY 

 
Eastech Badger warrants meters and parts manufactured by it and supplied 
hereunder to be free from defects in materials and workmanship for a period 
of 18 months from date of shipment or 12 months from date of installation, 
whichever period shall be shorter. If within such period any meters or parts 
shall be proved to Seller's satisfaction to be defective, such meters or parts 
shall be repaired or replaced at Seller's option. Seller's obligation hereunder 
shall be limited to such repair and replacement and shall be conditioned upon 
Seller's receiving written notice of any alleged defect within 10 days after its 
discovery and, at Seller's option, return of such meters or parts f.o.b. to 
Seller's factory. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN 
LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES 
WHATSOEVER INCLUDING BUT NOT LIMITED TO IMPLIED 
WARRANTIES (EXCEPT OF TITLE) OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. Eastech Badger shall not be 
liable for any defects attributable to acts or omissions of others after 
shipment, nor any consequential, incidental or contingent damage 
whatsoever. 
 
 
 
 
 

NUCLEAR DISCLAIMER 

 
Equipment sold by Eastech Badger is not intended for use in connection with 
any nuclear facility or activity unless covered by a specific quotation where 
the conditions of such usage will be detailed. If equipment is used in a 
nuclear facility or activity without a supporting quotation, Badger Meter 
disclaims all liability for any damage, injury or contamination, and the buyer 
shall indemnify and hold Eastech Badger, its officers, agents, employees, 
successors, assigns and customers, whether direct or indirect, harmless from 
and against any and all losses, damages or expenses of whatever form or 
nature (including attorney's fees and other costs of defending any action) 
which they, or any of them, may sustain or incur, whether as a result of 
breach of contract, warranty, tort (including negligence), strict liability or 
other theories of law, by reason of such use. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

All rights reserved. All data subject to change without notice.

 

Summary of Contents for 3000+























Reviews: