Now put the upper stamp underneath the Fle-
xi-holder, so that the distance bolt on the swi-
velling plate is exactly between the two split
pins of the upper stamp.
Now the upper stamp has to be put into the
Flexi-holder. Therefor, the retaining pin in the
upper stamp has to be put into the hole in the
bridge which you can see if you take a look at
the bridge from above. Put the retaining pin
into the right position until it is exactly in this
hole and then push the upper stamp upwards
until you hear a “click”. It is best if you push
against the Flexi-holder with your two thumbs
at the same time.
FIRST STEPS
08 English
235-19 badgematic-LA01-A5-JK.indd 34
20.11.2019 15:18:12
