Your first button:
Turn the swivelling plate by 180°
again.
There it is – your first self-
made button!
Working on the backside:
Depending on the backside variation you want to produce, an additio-
nal final step might be necessary. Concerning the 25 mm button with
D-shaped pin for example, you have to put the D-shaped pin into the
ring backside by hand yet. Concerning the 59 mm button with clip you
manually have to put the clip into the ring backside. Concerning the
25 mm earring button, finger ring button or button with metal insert
for sewing you have to glue the delivered parts into the backside with
the help of the self-adhesive foam pad. Please do not add before the
button is ready produced.
15
English
235-19 badgematic-LA01-A5-JK.indd 41
20.11.2019 15:18:22
