Bad Boy 1022H Operator'S Manual Download

Page: 30 / 148

BRANSON TRACTOR

⋾ᳲⱞ㕖Ṧ
⫚ᆚ⟆㐆⭾1

Con-

nect

brake

Pay attention when turning with

implement;

•

Depending on implements, the

overall length may become

very long. Pay particular atten-

tion to people or objects near-

by when making a turn.

If this instruction is ignored,

there is a risk of person injury

or a collision of the implement.

WARNING

Use caution sign when towing a

trailer;

•

Link the brake of the trailer

with the brake of the tractor.

Do not shift gears when driv-

ing on a hill.

If this instruction is ignored,

there is a risk of accident or in-

jury.

WARNING

Move wheels to widest setting

(width between left and right

tires) when working slope or

when towing;

If this instruction is ignored,

there is a risk of turning over.

WARNING

BB1022H.indb 24

2021-06-28 오후 5:53:16

Summary of Contents for 1022H





















































































































































Search results

Summary of Contents for 1022H

Reviews:

Related manuals for 1022H

Brands by name

Popular brands

Bad Boy 1022H, Operator'S Manual

Search results

Summary of Contents for 1022H

Reviews:

Related manuals for 1022H

Brands by name

Popular brands