Bad Boy 1022H Operator'S Manual Download

Page: 128 / 148

BAD BOY TRACTOR

(1) Body fuse box

Fuses are installed in this tractor to pre

vent any possible accident in case of wir

ing circuit malfunction.
If the electric system is malfunctioning

during driving, check for any blown fuse.

①

Remove the cover of the fuse box.

②

Remove the blown fuse.

③

Fit a new fuse with the same capacity.

④

The function and capacity of each fuse

are indicated on the cover of the fuse

box.

FUSE

(1) Fuse box

(1) High-capacity Fuse

WARNING



If using fuses other than the spec-

ified, wirings can be over-heated,

leading to a fire. Never use a fuse

with different capacity. Also, never

use a steel wire or foil instead of a

fuse.

BB1022H.indb 18

2021-06-28 오후 5:53:29

Summary of Contents for 1022H





















































































































































Search results

Summary of Contents for 1022H

Reviews:

Related manuals for 1022H

Brands by name

Popular brands

Bad Boy 1022H, Operator'S Manual

Search results

Summary of Contents for 1022H

Reviews:

Related manuals for 1022H

Brands by name

Popular brands