6
-
11
MAINTENANCE
6
1
1
Do not add front axle oil over the
upper limit level.
Check the front axle oil before
starting the engine or at least
in 5 minutes after the engine is
stopped.
When trying to use new oil from
a different manufacturer or oil
with different viscosity, drain
used oil completely before add-
ing new oil.
NOTE
CAUTION
If oil gets on your skin, it can ir-
ritate the skin and cause a skin
condition. Make sure to clean
your skin with soap and water or
hand cleaner thoroughly.
Make sure to cool down the en-
gine sufficiently before draining
oil. Oil is very hot and can cause a
burn if changing oil right after the
engine is stopped.
▶
REPLACING TRANSMISSION
FLUID FILTER CARTRIDGE
①
The HST oil filter is located under
the floor.
②
Remove the hydraulic oil filter el-
ement by turning it counterclock
-
wise with a wrench.
③
Apply a thin film of oil to the O-ring
of a new cartridge and install the
new cartridge by tightening it with
a hand. When its packing touches
the sealing surface, turn it approx.
2/3 turns further with a wrench.
④
Add hydraulic oil to the specified
level.
⑤
Check the oil level with the dip
-
stick again. If still insufficient, add
more.
REPLACING FILTER AND CARTRIDGE
TRANSMISSION
(1) HST Filter
BB1022H.indb 11
BB1022H.indb 11
2021-06-28 오후 5:53:28
2021-06-28 오후 5:53:28
Summary of Contents for 1022H
