![background image](http://html1.mh-extra.com/html/backyardcity-pool/bermuda/bermuda_assembly-and-installation_3347765029.webp)
STEP 20 – TOP WALL RIM INSTALLATION:
When the liner is completely adjusted and the plastic coping is secured, the next step is to install the top
wall rims. You should have three different size top wall rims (except for 12' X 17' pools which only have two)
Reference the chart in Step 10.
A) Starting at the first upright on one of the curved sides, push one of the longest top wall rims over the coping
so it fits snugly. Continue this until you get to the last curved side upright and then do the same with the
remaining “long” stabilizers on the other curved side.
B) Once the curved sides have been completed find the four 37" wall rims. Push these wall rims over the
coping in the “corners”.
Remember, the “corners” are the space between the last straight side upright and the first curved side upright.
C) The 33" wall rims are used in the spaces between the straight side uprights.
Top Wall Rim
Liner
Beaded liner track
Fig. 58
*Roll liner up and inward to hide excess underneath top
rail. (Rolling inward will prevent water from collecting in
flap.) Do not trim excess - this may cause liner to pull in!
Summary of Contents for Bermuda
Page 36: ......