4
ADDITIONAL MATERIALS
ALL SIZES
COMPLETING YOUR SHED
You will need these additional materials:
OPTIONAL MATERIALS
REFER TO THE BACK OF THIS MANUAL AND THE MANUFACTURER’S INSTRUCTIONS FOR
INSTALLATION OF SHINGLES, DRIP EDGE AND FELT.
3-TAB SHINGLES (Bundles)..................
PAINT FOR SIDING (Gallons)................
Use 100% acrylic latex exterior paint.
1" GALVANIZED ROOFING NAILS(lbs).
For shingles.
PAINT FOR TRIM ...........................2 Quarts
Use 100% acrylic latex exterior paint.
CAULK ...12x12' - 4 Tubes ...12x16' - 5 Tubes
Use acrylic latex exterior caulk that is paintable.
8
3
4
10
3
5
12x12' 12x16'
12x12' 12x16'
(2) coats recommended.
DRIP EDGE (Feet).......................................
#15 ROOFING FELT (Sq ft. to cover)........
1" GALVANIZED ROOFING NAILS(lbs)....
60
231
¼
70
298
¼
For roofing felt.
2" (5,1 cm)
2" (5,1 cm)
x2
x2
1 lb. of 2" (5,1 cm) Hot
Dipped Galvanized
Box-Type Nails.
1 lb. of 2" (5,1 cm) Hot
Dipped Galvanized
Box-Type Nails.
NOTE: Use a minimum of 5/8" (1,6 cm) Oriented Strand Board (OSB)
5/8" x 48" x96"
(1,6 x 121,9 x 243,8 cm)
x5
5/8" x 48" x96"
(1,6 x 121,9 x 243,8 cm)
x6
FLOOR PANELS (Not Included)
You will need foor panels and nails to complete your foor.
Floor panel sizes and quantities are shown below.
12x12'
12x16'
NAIL BOXES (Shown Actual Size)
3" (7,6 cm)
2" (5,1 cm)
x4
BOXES
x6
BOXES