52
Install (1)
40-5/8" x 48"
roof panel flush to installed panels.
Ensure 3/8" measurement at top of the (inner) rafter
(Fig. C)
.
Secure the panel with (1) 2" nail in each corner.
At the opposite (gable) end,
move the gable until the end rafter's edge is 3/8"
from the edge of the panel
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
Install (1)
40-5/8" x 96"
roof
panel flush to installed panels.
Ensure 3/4" measurement at
the rafter
(Fig. A)
.
Secure the panel to the rafter
with (1) 2" nail in each corner.
6
Flush
Flush
Flush
Flush
40-5/8" x 96"
40-5/8" x 48"
Move Gable
Move Gable
3/8"
(1,0 cm)
Gable
End Rafter
Fig. C
2" (5,1 cm) Nails
7
Maintain spacing between the centers of the rafters
(Fig. D)
.
Secure panels with (1) 2" nail in each rafter, as shown.
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
PARTS REQUIRED:
12' x 12' ROOF PANELS
5
2" (5,1 cm)
x12
3/4" GAUGE
BLOCK
7/16 x 40-5/8 x 48"
(1,1 x 103,2 x 121,9 cm)
x1
7/16 x 40-5/8 x 96"
(1,1 x 103,2 x 243,8 cm)
x1
Fig. D
3/4"
(1,9 cm)
Fig. A
Gauge
Block
