44
24-3/8”
(62 cm)
24-3/8”
(62 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
DIMENSIONS ARE TO CENTER OF RAFTERS.
DIMENSIONS ARE FROM OUTSIDE OF WALL PANELS.
END VIEW / VISTA DEL EXTREMO
24-3/8”
(62 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
24”
(61 cm)
24-3/8”
(62 cm)
DIMENSIONS ARE TO CENTER OF RAFTERS.
DIMENSIONS ARE FROM OUTSIDE OF WALL PANELS.
PARTS REQUIRED:
RAFTER INSTALLATION
ALIGN OVER
STUDS
ALIGN OVER
STUDS
Maintain the measurements between rafters.
Maintain the measurements between rafters.
Align rafters over the wall studs.
Check that you have the measurements shown.
Secure rafters with (2) 3" screws angled at each end
(Fig. A, Fig. B)
.
Secure rafters on opposite side.
1
FINISH
Your rafters are now installed.
BEGIN
Rafter with
ONE GUSSET
facing inward.
Rafter with
ONE GUSSET
facing inward.
Two-Gusset
Preassembled
One-Gusset
Preassembled
3" (7,6 cm)
x7
12x16'
x2
x36
x5
12x12'
x2
x28
Flush to
outside
of panel
Flush to
outside
of panel
Flush to
outside
of panel
Flush to
outside
of panel
Rafter with
ONE GUSSET
facing inward.
Rafter with
ONE GUSSET
facing inward.
Flush to inside
of panel
Flush to inside
of panel
Fig. B
Fig. B
12' x 12'
12' x 16'
Fig. A
3"
(7,6 cm)
Screws angled
into doubler.
Fig. A
3"
(7,6 cm)
Screws angled
into doubler.
Tight to side wall
Tight to side wall
