Backyard Discovery Highlander 6010, Owner'S Manual

Page: 49 / 60

STEP 28
Start Rock Wall by attaching Rocks to L1 Rock Wall Boards and L2 Rock Wall Boards, using ¼”x ¾” Phillips Truss Head
Bolts, 5/16” Lock Washers, Fender Washers and ¼” Barrel Nuts. Diagram 1
Set E3L Rock Wall Rail and E3R Rock Wall Rail against Tower and from Bottom attach L3, then L1, then L2 and continue to
top and fasten using 1-1/2” Wood Screws.
Position Rock Wall to Floor Rail and pilot drill E3L and E3R with 3/16” Bit and attach Rock Wall to Floor Rail using 5/16”x 2”
Lag Screws, 5/16” Lock Washers and Fender Washers . Diagram 3
Attach O2 Rock Wall Spacer between and Flush with top of E3L and E3R using 1-1/4” Wood Screws. Finish Wall with SC2
Rock Wall Board . Diagram 2
PAGE 47
BOLT
5/16”
LOCK
WASHER
ROCK
BO
ARD
FENDER
WASHER
BARREL
NUT
Use 1/4” x 3/4” Phillips Truss Head Bolt with 5/16”
Lock Washer. Then place Washer on Barrel
Nut and attach Rock to each board.
Fender
Diagram 1
E3L
E3R
L3
L1
L2
O2
SC2
Diagram 2
Diagram 3
ITEMS NEEDED
(5) L3 Rock Wall Boards
(1) E3L Rock Wall Rail
(1) E3R Rock Wall Rail
(1) SC2 Rock Wall Board
(1) O2 Rock Wall Spacer
(4) L1 Rock Wall Boards
(4) L2 Rock Wall Boards
(12) Rocks
HARDWARE NEEDED
(3) 1 ¼” Wood Screws
(56) 1 ½” Wood Screws
(2) 5/16” x2” Lag Screws
(26) 5/16” Lock Washer
(26) Fender Washer
(24) ¼” Phillips Barrel Nut
(24) ¼” x ¾” Phillips Truss Head Bolt