H2
H10
H10
STEP 1
Start by removing Tent Top. Then remove H2 Tent
Support and H10 Uprights. Then remove H1 Roof
Support Rails from both sides, back and front of set,
and you need to mark H1s starting from edge at 1-
3/4”, 20-1/8”, 39-3/8”, and 57-3/4”. Then put a mark
at each of these points; 3/4” down from top of H1
and 1-3/4”down from top of H1. Then using 3/16”
pilot drill, drill at these locations.
© Copyright Playground Inc
Part # 50
17
Next Generation
PLASTIC ROOF
ASSEMBLY INSTRUCTIONS
If you need assistance with parts or have assembly questions, please call
Customer Service at 866-362-1123. Our regular office hours are
Monday through Friday, 7:00 a.m. to 4:00 p.m. Central Time
LEISURE TIME PRODUCTS
G2
G2
H1
H1
1 x 3-1/2 x 29-1/2 [ 2.54 x 8.89 x 74.93 ]
H10 Upright * 2 Holes * 2 Req
1 x 3-1/2 x 59-1/2 [ 2.54 x 8.89 x 151.13 ]
H1 Roof Support * 4 Holes * 2 Req
1 x 3-1/2 x 59-1/2 [ 2.54 x 8.89 x 151.13 ]
H2 Tent Support * 4 Holes * 1 Req
H1
3/4”
1 3/4”
1 3/4”
20 1/8”
39 3/8”
57 3/4”
H5
TENT TOP
H1
H1
Meijer.com
Summary of Contents for Cedar Mountain 5007
Page 3: ...Meijer com...
