STEP 46
Attach eight M9 Wall
Boards to the inside of
M1s spacing
approximately 2-3/4”
apart, again using 1 1/4”
Wood Screws.
Step 47
Placing Entry Ladder Rail E1, either
left or right, flat on ground, drive 15-
1/4” Metal Dowels, using Pounding
Block, into Rail. Then place opposite
Ladder Rail, lining up Dowels, using
Pounding Block, drive together so that
Entry Ladder Rails are 16” apart
outside to outside. Then attach M11
Entry Ladder Back to inside of Ladder
Rails measuring up from bottom 1/8”
and fastening with 2” Wood Screws.
E1
E1
M11
16"
M11 Entry Ladder Support * 4 Holes * 1 Req
11/16 x 3-3/8 x 16 [ 1.74 x 8.57 x 40.64 ]
11/16 x 3-3/8 x 23 [ 1.74 x 8.57 x 58.42 ]
M9 Wall Board * 4 Holes * 23 Req
E1 Entry Ladder Rail * 4 Holes * 1 Set Left & Right Req
1-3/8 x 3-3/8 x 52 [ 3.49 x 8.57 x 132.08 ]
15 1/4” METAL DOWELS
4 REQUIRED
#8 X 1-1/4"
WOOD
SCREW
#8 X 2"
WOOD
SCREW
© Leisure Time Products Inc.
Next Generation 5007 10-0409 Version 4
Y28
Page 31
C1
C2
G1
M1
M9
M9
M9
M9
M9
M9
M9
M9
Meijer.com
Summary of Contents for Cedar Mountain 5007
Page 3: ...Meijer com...
