Bacharach Parasense GRM2 CO2 Series, Operation & Maintenance Manual

Page: 33 / 97

5-9
Operation & Maintenance Manual
Doc. Ref. MNGRM2CO2 REV. 3
NETWORK DEFAULTS
Selecting
‘Network Defaults’ will show the default IP network settings and ask for confirmation.
Set network defaults
and reboot the system?
Address: 192.168. 0. 50
Netmask: 255.255.255. 0
Server: 192.168. 0. 1
Gateway: 192.168. 0. 1
No
Yes
< Back
Confirm that you want to set the IP networks settings
as displayed on the screen by selecting ‘Yes’. If
you wish to abort this function, select No and press the button to return to the management menu,
leaving the network settings unchanged. Pressing the button will also abort this function and return
to the management menu leaving the network settings unchanged.
REBOOT GRM2C
If required, you can reboot the monitor from here (Note: this function does not change any settings,
but simply reboots the monitor).
From
the management menu, select ‘Reboot GRM2C’. Highlight ‘Yes’ using the
buttons and
press the button. The monitor will now reboot. If you do not wish to continue with this function,
highlight No and press the button, or press the button. This will cancel the reboot and return to
the management menu.
Confirm Reboot
Do you want to reboot
the system?
No
Yes
< Back