Multi-Zone Gas Monitors
34
P/N: 3015-5074 Rev 11
4.4.2. Responding to Alarms
An operator can respond to the alarms by accessing the
Alarm Summary Screen.
Navigate to this screen
by selecting ALARM on the first (
Data Display
) screen.
Figure 4-3. Alarm Summary Screen
The
Alarm Summary Screen
displays a list of all alarm conditions pending across the network. The screen
is divided into 8 boxes, and each box represents a single alarm. If more than 8 alarms are pending, the
MORE option will be displayed at the bottom of the screen to permit access to that additional information.
Each box displays the zone number, zone name, and the current PPM reading. A flashing box indicates an
alarm that has not been acknowledged. A static box represents an alarm that has been acknowledged, but
has not yet been cleared from the system.
4.4.3. Alarm Detail Screen
To further investigate an alarm, press the ENTER key to go to the
Alarm Detail Screen
.
Figure 4-4. Alarm Detail Screen
The
Alarm Detail Screen
displays more comprehensive information about the nature of the alarm including:
•
Complete location information
•
Gas type and current concentration (CONC NOW)
•
Peak concentration and peak time
•
Type of alarm, alarm time, and dat e.
Summary of Contents for MultiZone
