![background image](http://html1.mh-extra.com/html/bac/nexus-nxf-0403n-cs2ts-h1/nexus-nxf-0403n-cs2ts-h1_operation-and-maintenance-manual_3315538031.webp)
29
29
Setting Date and Time
The date and time are preset from the factory and don’t need modification during the
initial start-up and operation of the unit. However, if the unit is in storage for an extended
period of time the date and time may need to be reset. To update these parameters, follow
these steps from the control panel screen (refer to the “iPilot
®
Control System Appendix”
on
page 45
).
• Press Prg. Use the password “0000” when prompted (it is recommended you modify
the password cat start-up for security).
• Scroll up/down and select “Clock Menu”, then press enter.
• While in the Clock menu press enter to begin making changes, use the up/down arrow
to set the correct time and date, then press enter to accept the changes.
Software Verification for a pCO Controller
If a BAC Factory Technician is troubleshooting the controller over the phone, they may ask
for the software version. To provide them with the information, follow these steps from the
control panel screen (refer to the “iPilot® Control System Appendix” on
page 45
).
• Press Prg.
• Scroll up/down and select “System Info”, then press enter.
• The Version of the software will be displayed along with other information.
Retrieval of Logged Data
System core operating information can be downloaded to a USB flash drive or through a
USB cable as follows:
• If using USB to download the data, turn off the main disconnect and open the main
control panel door.
• Insert the USB in to the controller and close the door.
• Lock the door and turn on the main disconnect.
• In the user interface, navigate to “Point Overview”, then press enter.
• Scroll down to “Data Log Export” and select File Destination as USB.
• Specify File Reference number and Confirm to download the .csv file.
For additional details, refer to “iPilot
®
Control System Appendix” on
page 45.
Detailed Component
Maintenance Procedures
iPilot
®
Control System
Components
Setting Date and Time
Software Verification for a pCO
Controller
Retrieval of Logged Data