www.implast.com.pl
WARNING:
This pram has been designed to be operated as shown in the instructions.
Failure to follow these instructions may cause damage and render the guarantee void.
Fitting/Removing the wheels
•
To fit the wheels. Turn the chassis on its
side and gently slide the wheel on to the
axle until it stops, now depress the steel
clip (found in the centre hub of the wheel)
until the wheel drops further on to the axle
and stops. Release the steel clip and slide
the wheel back (as if removing) until the
wheel locks into position (Picture 1).
Check that the wheels are fitted securely
before use.
•
To remove the wheels, depress the
metal clip while simultaneously easing
the wheel off with a twisting action. Care
should always be taken when fitting &
removing wheels.
2.
Unfolding the chassis
•
To erect the chassis apply the parking
device; pull the handle upwards
and over following the direction of the
arrow (Picture 2). Check that the two
sliders on either side of the chassis are
locked in position (Picture 3).
3.
1.
PNEUMATIC TYRES: Please note that pneumatic tyres; by their nature are prone to
puncture, punctures can be repaired with a standard puncture repair kit or the inner-tube
can be replaced. Remember that rubber tyres can leave marks on some surfaces (see
General Care & Maintenance).
5406_F_Implast_ lux.indd 3
2006-11-22 08:37:34
