www.implast.com.pl
Adjusting the footrest
•
To adjust the footrest press the two
buttons on the top of the footrest and
lift or lower the footrest to the desired
position (Picture 11).
Adjusting the handle
•
To regulate handle, simultaneously
push the two buttons of the handle
height adjuster and rotate the handle
to the desired position (Picture 12).
Operating the brake
•
To engage the parking device, push the
lever down with your foot until it locks
into position. Avoid
uphill or downhill
parking. Never let go of the handle. To
release the brake, lift up with your foot
(Picture 13).
10.
11.
12.
13.
Fitting the bed
extension
•
To attach the bed extension, remove
front bar, set the footrest to horizontal
position (see Adjusting the footrest) and
push the bed extension brackets into the
plastic housing until it clicks. To remove
the bed extension, depress the plastic
latches at the bottom of the bracket and
pull upwards simultaneously (Picture 10).
Fitting the head hugger
(Twin Classic only)
•
To fit the head hugger (remove the
hood if fitted); attach the press-studs on
the head hugger to the corresponding
press-studs on the rear outside part
of the seat unit armrests. Replace the
hood. Note: The base fabric of the head
hugger should always be behind the seat
unit backrests.
5406_F_Implast_ lux.indd 6
2006-11-22 08:37:35
