www.implast.com.pl
Attaching the seat unit or pram body
•
Tilt the seat unit or pram body
forward and locate the two front
pegs in the attachment mechanism
(no. 1, Picture 4). Gently push
down until the two pegs lock into
position; now tilt the unit backward
until the rear attachment pegs lock
into the rear attachment mechanism
(no.2, Picture 4). ENSURE THAT
THE SEAT UNIT OR THE PRAM
BODY IS SECURELY FITTED
BEFORE USE.
•
To remove the seat unit
or pram body. Gently apply
downward pressure to the seat
frame or pram body & then
push the red attachment
mechanism lever (no.1,
Pictrue 5) forward until it stops,
repeat this action on the opposite
side. Standing in the pushing position;
tilt the seat or bassinet unit upward
until the two forward attachment
pegs are released from the attachment
mechanism; now slide the two rear
pegs from their attachments and lift
the unit clear of the chassis.
Pram body sit-up board
The pram body is equipped with a sit-up
board. The sit-up board is for use as
a back rest when your child is ready to sit
up. The sit-up board can be
erected/reclined to three positions
or folded flat into the sleeping position.
To erect the sit-up board lift the top
of the sit-up board and locate
the support bar (at the back of the sit-up
board) in the desired position.
The support bar locates in the plastic
housings on the inside base of the pram
body. To recline the sit-up board;
release the support bar and recline the
sit-up board back rest (Picture 6).
4.
5.
6.
5406_F_Implast_ lux.indd 4
2006-11-22 08:37:34
