www.implast.com.pl
Fitting the hood
Seat Unit/ Pram Body
•
To attach or remove the hood.
Push the hood bracket into the
plastic housing until it clicks (Picture 7).
•
To remove the hood, depress the
plastic latch at the bottom of the
bracket and pull upwards.
NOTE :
Some models are supplied
(depending on design) with a valance
that fits via a zipper to the rear bottom
edge of the hood. The valance is
designed for use with the hood when
used in conjunction with the seat unit.
Fitting the front bar
•
To attach front bar, push the front
bar bracket into the plastic housing
until it clicks (Picture 8).
•
To remove the front bar, depress
the plastic latch at the bottom
of the bracket and pull upwards
simultaneously.
Adjusting the seat
unit backrest
•
To adjust the position of the seat unit
backrest, support the seat back in one
hand press-in button (picture no 9.).
While holding the button in; reposition
the backrest as desired and release
the button. The backrest has 5 usable
positions.
Adjusting the seat
unit backrest
(Twin Classic only)
•
To recline an individual seat unit
backrest, gently pull the bar in the
middle of the back of the seat backrest,
recline the seat to one of its three
positions and release the bar, the seat
will automatically drop into position.
8.
9.
7.
5406_F_Implast_ lux.indd 5
2006-11-22 08:37:35
