Page 32
Baby Lock Tiara III Instruction Manual
System Information Screen
The machine serial number is displayed at the top of the
System Information screen. This number matches the
one found on the label at back of machine.
Information contained in the white boxes below the
serial number identifies the electronics board version
numbers as well as the firmware version numbers of the
Baby Lock Tiara III.
The Lifetime and Trip (or project) stitch counters count
the number of stitches the machine has performed. The
Lifetime count is the total number of sewn stitches since
the machine was built. The Trip Counter can be reset to
keep track of the number of sewn stitches during a given
project. To reset this counter, press the Reset button to
the left of the Trip counter.
Figure 39
The Lifetime counter cannot be reset and should be used as an indicator to determine when general machine
maintenance should be performed by your authorized Baby Lock retailer (Figure 39).
Â
Important maintenance message:
Baby Lock recommends taking your machine to an authorized
Baby Lock retailer for a regular maintenance check. Such steps will help to ensure you receive
continued, uninterrupted hours of machine operation for the future.
Press the Main button to return to the Main menu screen or the Back button to return to the More menu screen.
Diagnostics Screen (Figure 40)
Four different diagnostics tests can be performed on
the machine. These functions test the motor control
operation, the foot pedal and the internal position
sensors.
Press the Main button to return to the Main menu
screen or the Back button to return to the More menu
screen.
Figure 40
Summary of Contents for Tiara III BLTR16-3
Page 1: ...3 ...