16 | Getting Started
www.BabyLock.com
9. Verify that the Y-axis gear engages the blue Flexirack on the Y-axis bracket.
• Do this by looking from the back of the machine between the bottom of the quilting machine and
the top of the carriage. If necessary, use the manual engagement/disengagement tool to move
the gears so they engage.
• If horizontal adjustment is needed to ensure that
at least half the white gear and blue Flexirack are
interlocking, loosen the two screws that mount
the Y-axis bracket to the base plates and push the
bracket in the direction necessary, hold in place,
and re-tighten the screws.
• Both screws can be adjusted with the quilting
machine on the carriage. Pull the machine to the
front to access the front screw and to the rear to
access the rear screw.
• Pull the quilting machine to the rear of the carriage and ensure the rear of the Y-axis bracket does
not collide with the black plastic track retainer on the rear of the carriage. Adjust the Y-bracket
if needed.
Â
IMPORTANT
: If necessary, use the manual
engagement/disengagement tool to move the
gears so they engage. Insert the end of the
tool into the hole at the front of the
Pro-Stitcher Carriage.
10. With the power cable plugged in and the motors in the engaged position (use the manual
engagement/disengagement tool if necessary), ensure that as the quilting machine is moved in
both the X and the Y directions, the corresponding gears are rotating, as well.
Summary of Contents for Regalia BLPS4-RG
Page 1: ...Getting Started Guide for the Regalia Model BLPS4 RG...
Page 26: ......