Baby Lock emore BLMR, Instruction And Reference Manual

Page: 31 / 92

Winding/Installing the Bobbin 29
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
m
Press
/
(“Start/Stop” button) once to
start winding the bobbin.
a “Start/Stop” button
• When the bobbin winding becomes slow,
press / (“Start/Stop” button) once to
stop the machine.
CAUTION
n
Use scissors to cut the end of the thread
wound around the bobbin.
o
Slide the bobbin winder shaft to the left, and
then remove the bobbin from the shaft.
p
Remove the spool for the bobbin thread from
the spool pin, and then close the top cover.
Memo
z
When the machine is started or the
handwheel is turned after winding the
bobbin, the machine will make a clicking
sound; this is not a malfunction.
Installing the bobbin
Install the bobbin wound with poly 90 weight bobbin
thread.
CAUTION
a
Slide the bobbin cover latch to the right.
a Bobbin cover
b Latch
X
The bobbin cover opens.
b
Remove the bobbin cover.
c
Hold the bobbin with your right hand and hold
the end of the thread with your left.
●
When the bobbin winding becomes slow,
stop the machine, otherwise the machine
may be damaged.
1
●
Use a bobbin that has been correctly
wound with thread, otherwise the needle
may break or the thread tension will be
incorrect.
●
The bobbin was designed specifically for
this machine. If bobbins from other models
are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code:
X52800-120).
Actual size
11.5 mm
This model Other model
(7/16 inch)
2 1