![background image](http://html1.mh-extra.com/html/baby-lock/emore-blmr/emore-blmr_instruction-and-reference-manual_3339585083.webp)
Troubleshooting
81
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Machine does not
operate when
button is pressed
.
An animation is displayed on the
LCD.
Touch the LCD with your finger, and
the animation will disappear.
page 22
Embroidery unit
does not move
.
No pattern selected.
Select a pattern.
page 50
The embroidery unit is not set up
correctly.
Set the embroidery unit up correctly.
page 17
Embroidering
continues
although the
bobbin thread ran
out.
Dust has collected on the bobbin
thread sensor.
Remove any dust from the bobbin
thread sensor.
page 74
Embroidery not
neatly done
.
The fabric is not fully stretched on
the embroidery frame. The fabric
is loose.
Stretch the fabric properly on the
embroidery frame.
page 45
No stabilizer material is attached.
Always use stabilizer material for
embroidery with stretch fabrics, thin
fabrics, fabrics with a loose weave
and fabrics where stitches easily
contract.
page 44
The thread is tangled and the
bobbin case, etc., is plugged up.
Remove the tangled thread. When
the bobbin case is plugged up, clean
the race and the bobbin case.
page 74,
page 75
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 64
Objects are placed near the
carriage or embroidery frame.
If the embroidery unit carriage or
embroidery frame bumps into objects,
the pattern will be misaligned. Do not
place objects within the range of
embroidery frame motion.
page 18
Material coming out of the
embroidery frame is causing
problems.
Stretch the fabric on the frame once
again so that the material coming out
of the embroidery frame does not
cause problems, rotate the pattern
and embroider.
–
A heavy fabric is being
embroidered, and the fabric is
hanging off the table.
If embroidery is done with the fabric
hanging off the table, the embroidery
unit movement will be impaired.
Support the fabric while embroidering.
–
The fabric is catching. It is
pinched.
Stop the machine and set the fabric
up correctly.
–
The carriage was moved while the
embroidery frame was being
removed or attached during
embroidery.
If the carriage is moved during the
process, the pattern may be misaligned.
Be careful when removing or
attaching the embroidery frame.
–
Symptom
Probable Cause
Remedy
Reference
Summary of Contents for emore BLMR
