![background image](http://html1.mh-extra.com/html/baby-lock/bnt10/bnt10_instruction-and-reference-manual_462364269.webp)
Using the Optional Cap Frame
267
7
—————————————————————————————————————————————————————————————————————————————————————
j
Use the clips to secure the cap.
1
Clips
• Attach the clips with their handles folded
inward. If the handles are pointed outward,
they may be hit by the machine’s presser
foot.
X
This completes the positioning of the cap
in the cap frame.
k
Return the cap frame to its original position.
• While pulling the lever behind the handle
on the right side of the mounting jig toward
you, rotate the cap frame to the left. After
the cap frame has been rotated 90° and the
brim points up, release the lever to lock the
cap frame in place.
1
Handle
2
Lever
l
Remove the cap frame from the mounting
jig.
To remove the cap frame from the mounting
jig, place both thumbs on the holders on the
mounting jig, grasping the handles on both
the right and left side of the cap frame, gently
pulling toward you. As shown in the
illustration.
1
Holder
2
Handle
■
Attaching the cap frame to the embroidery
machine
The cap frame driver is required in order to
attach the cap frame to the embroidery machine.
Before attaching the cap frame to the machine,
attach the cap frame driver to the carriage.
(Refer to “Installing the cap frame driver” on
page 255.)
Before attaching the cap frame, adjust the
position of the cap supports to fit the type (size)
of cap to be embroidered. To adjust move the
cap supports to the front or back depending on
the cap size.
1
Loosen the four screws on the cap supports
two or three turns, and then move the cap
supports to a position where tension in the
cap will be maintained.
• Do not remove any of the screws,
otherwise they may be lost. Only turn the
screws to slightly loosen them.
1
Cap supports
2
Screws
3
Low profile (shorter caps)
4
Standard (taller caps)
• Be sure to adjust both the right and left cap
supports to the same position.
Summary of Contents for BNT10
