![background image](http://html1.mh-extra.com/html/baby-lock/bnt10/bnt10_instruction-and-reference-manual_462364266.webp)
APPENDIX
————————————————————————————————————————————————————————————————————————————
264
9
Close the clamping frame so that the brim of
the cap passes between the inside clamping
frame and the outside clamping frame.
1
Brim of the cap
2
Inside clamping frame
3
Outside clamping frame
0
Neatly align the teeth of the clamping frame
with the base of the brim.
1
Teeth of outside clamping frame
2
Base of brim
Note
●
Loosen the two screws for the outside
clamping frame, and then adjust the
position of the outside clamping frame so
that it conforms to the shape of the cap
and so that the teeth of the clamping frame
perfectly align with the base of the brim.
1
Teeth of outside clamping frame
2
Base of brim
3
Outside clamping frame
4
Screws for the outside clamping frame
a
Secure the clamping frame with the snap
lock. At this time, push the end of the sweat
guard into the cap so it does not interfere
with the snap lock.
1
Snap lock
2
Fold the sweat guard as shown.
Note
●
Before closing the lever of the snap lock,
check that the cap has not moved out of
position and that there are no wrinkles.
Adjust the cap if necessary.
Summary of Contents for BNT10
