![background image](http://html1.mh-extra.com/html/baby-lock/bnt10/bnt10_instruction-and-reference-manual_462364173.webp)
Selecting an Embroidery Pattern
171
—————————————————————————————————————————————————————————————————————————————————————
5
4
As described in steps
1
through
3
, remove
the protective cap from the rear screw hole
on the side of the machine, and then insert
an opened USB cord clamp.
5
Check that the USB cord clamps have been
firmly inserted into the front and rear screw
holes on the side of the machine.
• If the USB cord clamps are not firmly
inserted into the screw holes, they are not
correctly installed. Firmly insert the cord
clamps into the screw holes.
6
Pass the USB cable through the front USB
cord clamp, and then close the clamp to
secure the cable.
Note
●
When passing the USB cable through the
clamp, do not insert it with excessive
force; otherwise, the clamp may break.
7
Using the same operation described in step
5
, secure the USB cable with the rear USB
cord clamp.
8
Arrange the USB cable between the USB
cord clamps so that the cable does not
interfere with the operation of the machine.
Memo
●
Store the protective caps, which were
removed in step
1
, in the included
accessory case so they will not be lost.
Summary of Contents for BNT10
