![background image](http://html1.mh-extra.com/html/baby-lock/bnt10/bnt10_instruction-and-reference-manual_462364030.webp)
GETTING READY
————————————————————————————————————————————————————————————————————————
28
Setting up the machine
When setting up the machine, adjust the legs so
that the machine is steady.
1
Make sure that all packing tape affixed to the
machine is peeled off and that all packing
material is removed.
2
Set up the machine while making sure that
there is sufficient space around it.
3
Adjust the legs so that the machine is steady.
Use the included wrench to loosen the lock
nut on the leg that you wish to adjust.
1
Lock nut
2
Adjustable foot nut
X
The foot can be turned.
4
Use the included wrench to turn the
adjustable foot nut on the foot.
Turning the nut in direction
1
lengthens the
leg; turning the nut in direction
2
shortens
the leg.
1
Adjustable foot nut
• Adjust all four legs so that they securely
contact the desk or table, and the machine
is level.
5
After adjusting the legs to the desired length,
use the included wrench to tighten the nuts.
1
Lock nut
6
Press down on each corner of the
embroidery machine to check that it is
stable.
If it is still unstable, perform steps
3
through
5
again to adjust the legs.
Minimum of
50 mm
(2 inches)
589 mm
(23-1/4
inches)
More than
350 mm
(13-3/4
inches)
More than
210 mm
(8-1/4 inches)
560 mm
(22 inches)
220 mm
(8-3/4 inches)
Summary of Contents for BNT10
