manualshive.com logo in svg

Baby Lock BNT10, Instruction And Reference Manual, Page: 162 / 312

Share
Download
Baby Lock BNT10 Instruction And Reference Manual Download Page 162

SELECTING/EDITING/SAVING PATTERNS 

—————————————————————————————————————————————————————————

160

5

With the first character entered, touch 

 

to change the size of the character.

1

Touch this key to change the size.

• The next characters that are selected will 

have the new character size.

• The character size of all entered characters 

cannot be changed after the characters are 
combined. (The size of the entire pattern 
can be changed from the pattern editing 
screen.)

Note

●

Size of the two small fonts 

 and 

 cannot be changed. Both of these 

smaller fonts are shown on page 4/4 of the 
font selection screen.

6

Touch 

 and enter “ucky”.

1

If the wrong character was selected or you wish 

to select a different character, touch 

 to 

delete the last character selected, and then 

touch the key for the desired character. Each 

touch of 

 deletes the last character of 

the text.

7

Touch 

 to enter a space.

1

1

Summary of Contents for BNT10

























































































































































































































































































































Reviews:

No comments